Steel pipe bundling machine
This steel pipe bundling machine is fork type machine. The mechanism is like a fork arm lift one layer of pipes and one layer after one layer to form a square bundle or hexagonal bundle. It can be used for bundling round pipe and square or rectangular pipe with one machine.
Ⅰ、Steel pipe information：the objective of packing
Pipe size：Round pipe and similar size of square/rectangular pipe
Ⅱ、Brief description of machine
The qualified pipes are sent by roll table to the packing machine department, the following is the brief description of packing job.
1. Counting device: The pipes are counted and recorded when they are sent by roll table waiting for next step.
2. Bundling section: The number of pipes reach to a layer’s pipe number, this layer of pipes will be pushed neatly and the fork mechanism will lift the whole layer into the bundle basket. Retangular pipe turning device is not included here.
3. Bundle basket with carrige: This device receive the pipe layers sent by fork mechanism, and when the bundle is ready( reach to setting number and shape), the carrige under the basket will move the bundle vertically and horizontally to the strapping position.
4. Semi-auto strapping: The steel strap is driven by this device, it goes around the bundle, the worker take the handle packer to link the steel strap after it goes around the bundle. After the one strap, the pipe bundle move forward to another strapping posion, and do the above movement again until all the straps are done on pipe bundles.
5. Bundles transfering: This part is as follow photo, this place allow two or three bundles for temporary storage waiting for crane to take them to warehouse.
6. Hydraulic and electrical control: Hydraulic system and electricity offer the power of the machines and controled by PLC touch screen.
The following photo is the sample of touch screen. Seller can make it more suitable with buyer’s habit such as choose bundle shape for programm; input pipe diameter to run the program.
7. Electrical element supplier：PLC and touch screen are from Siemens, frequency convertors are from Yaskawa; sensors are from Omron. Hydraulic parts are from Beijing Huade.
Ⅲ： Machine size and weight
Machine size： 16m×7.5m×1.6m
Air consuption： 1.5m3/min
Weight：Around 12 mt
If you are interested in our machine, please contact us, firstname.lastname@example.org